Clean Products Inc.

 
 Continuous, High Production  
CFSTM Wastewater  
Treatment/Recycling Systems

 
 
CFSTM Process 
Patented "Combination Flotation/Sedimentation" process  recognizes that most wastewater contains fines and heavier material and is designed to remove sludge from the top and bottom while extracting the cleaned water from the center.  Induced air accelerates the separation and polymers are used to help accumulate the sludges for a faster, continuous, and simple to operate wastewater treatment system. 
Combination Flotation-Sedimentation Process
 
Recycle with CFSTM
  • Reduce disposal 
  • Minimize off site hauling
  • Reduce Cleaning or coolant chemical costs
  • Cut disposal costs
  • Treat sludges for easier disposal
  • Reduce long term liability

 
 

 

 

Central Treatment/Recycling Systems

 
Continuous Systems to remove oils, suspended solids, dissolved heavy metals, BOD's, COD's,  or use for a pretreatment separator for ultra filtration or RO systems. 
Use the system to reduce the load on lagoons, bio-reactors, or membrane filters.  Continuous systems starting at 5 gpm - portable and stationery units.
CFS 36 - SS
 		 Portable Recyling System for 5 gpm
 

 

Total wastewater recycling system for up to 5,000 gpm
 

 

 

Combine Multiple Processes into One System
pH Adjustment

Heavy Metals Removal

Ozone Reactors

Coagulation &
Flocculation

 Use multiple processes in one system Reduce load on:

Lagoons

Membrane Filtration

DE Filters

Bio-Reactors
 
Return to our home page 
E-mail us at info@wastewater-recycling.com 
For parts washers, please go to www.cleanproducts.com 
For dry blast or bake degreasing, go to www.techniblast.com 		 Clean Products Inc. 
PO Box 592; Hwy 99 North 
Seminole, OK 74818-0592 
 405-382-1441; fax 405-382-0545